Difference between revisions of "Installing PM Software Stack"

From Pulsed Media Wiki
 
(3 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
== Requirements ==
 
== Requirements ==
* Freshly installed dedicated server/VPS with [[Debian]] 7.0
+
* Freshly installed dedicated server/VPS with [[Debian]] 8.0
 
* root access to the server
 
* root access to the server
* [[DNS]] setup for [[FQDN]] in one form or another
+
* [[DNS]] setup for [[FQDN]] in one form or another (this is usually provided by your [[Datacenter]], so you don't need your own domain)
 
Note: Quota may or may not work with [[OpenVZ]]. At the very least do not alter default quota (inc. do not compile quota from source) in a OpenVZ virtual machine.
 
Note: Quota may or may not work with [[OpenVZ]]. At the very least do not alter default quota (inc. do not compile quota from source) in a OpenVZ virtual machine.
Note 2: [[Debian]] 6.0 quota from repository is quite sufficient. See bottom of this page for [[Debian]] 6.0 special instructions.
 
  
 
== Quick installation ==
 
== Quick installation ==
cd ~
 
 
  wget http://pulsedmedia.com/remote/install.sh
 
  wget http://pulsedmedia.com/remote/install.sh
 
  bash install.sh
 
  bash install.sh
  shutdown -r now
+
  reboot
  
Reply to questions, and setup quota as requested (if needed). After reboot issue command ''quotaon -av'' and you are done :)
+
Reply to questions, and setup quota as requested (if needed).  
  
 
=== Quota setup ===
 
=== Quota setup ===
Line 20: Line 18:
 
  /dev/md4        /home  ext4    defaults,noatime,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1      1      2
 
  /dev/md4        /home  ext4    defaults,noatime,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1      1      2
  
 
+
If you are unsure if it is working properly run ''/scripts/util/quotaFix.php''
=== SSL Cert questions ===
 
You may skip all of them, these are innecessary and empty works fine if you want to allow non-signed cert HTTPS.
 
  
 
=== Hostname ===
 
=== Hostname ===
 
When the installation scripts open the file for hostname make certain it is the servers FQDN. You can even leave it as is, as now you can also access user accounts via any hostname/ip it responds to in the format of '''uri/user-#USERNAME#/'''
 
When the installation scripts open the file for hostname make certain it is the servers FQDN. You can even leave it as is, as now you can also access user accounts via any hostname/ip it responds to in the format of '''uri/user-#USERNAME#/'''
  
 
+
Failure for [[FQDN]] resolution means that [[ProFTPd]] will not function properly, all other functions should work as normal.
== Installing on Debian 6.0 Squeeze ==
 
At the very least you need to remove quota compilation from installation, and the line with rar installation for apt-get is not working. The correct package in squeeze is ''unrar-free''.
 
After installation complete you need to run:
 
/usr/sbin/lighty-enable-mod fastcgi
 
/usr/sbin/lighty-enable-mod fastcgi-php
 
/etc/init.d/lighttpd force-reload
 
 
 
Among a lot of environment changes, and probably a few added packages as well. The default in Debian 6.0 are quite poor for server environments, or general shell usage. For example, VI enhanced is lacking syntax highlighting, some autocomplete features work somewhat ''illogically'' compared to 5.0 etc.
 
 
 
The list of changes required for [[Debian]] 6.0 is quite extensive for optimal experience, but above instructions will get you started.
 
  
  
 
[[Category:PM Software Stack Guides]]
 
[[Category:PM Software Stack Guides]]
 
[[Category:Guides]]
 
[[Category:Guides]]

Latest revision as of 14:31, 20 August 2018

Installation of PM Software Stack is very easy and self-explanatory with basic linux server administration skills. The complete procedure takes 15 to 30mins depending on the type of server, most of this time is spent by apt installing new packages and compiling required software from source.

Requirements

  • Freshly installed dedicated server/VPS with Debian 8.0
  • root access to the server
  • DNS setup for FQDN in one form or another (this is usually provided by your Datacenter, so you don't need your own domain)

Note: Quota may or may not work with OpenVZ. At the very least do not alter default quota (inc. do not compile quota from source) in a OpenVZ virtual machine.

Quick installation

wget http://pulsedmedia.com/remote/install.sh
bash install.sh
reboot

Reply to questions, and setup quota as requested (if needed).

Quota setup

Copy & paste last line of the fstab line without # character to the according device options, ie.:

/dev/md4        /home   ext4    defaults,noatime,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1       1       2

If you are unsure if it is working properly run /scripts/util/quotaFix.php

Hostname

When the installation scripts open the file for hostname make certain it is the servers FQDN. You can even leave it as is, as now you can also access user accounts via any hostname/ip it responds to in the format of uri/user-#USERNAME#/

Failure for FQDN resolution means that ProFTPd will not function properly, all other functions should work as normal.